Products By Application: Coatings and Industrial Flooring
Select an Application or return to the products overview
 |
Coatings and Polymer Flooring |
|
Sikadur 51 NS |
|
| |
|
|
Sikadur 51 NS is a 2-component, non-sagging, solvent-free, moisture-tolerant, flexible epoxy control joint sealer and adhesive. |
|
|
|
Sikadur 51 SL |
|
| |
|
|
Sikadur 51 SL is a 2-component, self-leveling, 100% solids, flexible, control joint resin sealer and adhesive. |
|
|
|
Sikaflex-2c NS |
|
| |
|
|
Sikaflex-2c NS is a 2-component, premium-grade, polyurethane-based, elastomeric sealant. It is principally a chemical cure in a non-sag consistency. Meets ASTM C-920, Type M, Grade NS, Class 25, use T, NT, M, G, A, O, I and Federal Specification TT-S-00227E, Type II, Class A. Tested in accordance with ASTM C-1382 for use in EIFS Systems. |
|
|
|
Sikaflex-2c SL |
|
| |
|
|
Sikaflex-2c SL is a 2-component, premium-grade, polyurethane-based, elastomeric sealant. It is principally a chemical cure in a self-leveling consistency. Meets ASTM C-920, Type M, Grade P, Class 25, use T, NT, M, G, A, O, I and Federal Specification TT-S-00227E, Type I, Class A. |
|
|
|
Sikafloor FTP |
|
| |
|
|
As a Green Concrete Primer: Sikafloor FTP is a three-component, 36% solids, waterborne epoxy. As a green concrete primer, Sikafloor FTP will allow Sikafloor systems to be applied to properly designed green concrete inside the typical 28 day concrete curing window. This primer is specially formulated for superior penetration and adhesion to a green concrete slab. Primer application within eight (8) hours of pour eliminates the need for shotblasting of acceptably designed concrete. Fast Track Primer seals the surface of the slab and can act as a concrete curing compound to improve the physical properties of the concrete by allowing proper hydration. As a Moisture Vapor Treatment: Sikafloor FTP is a three-component, 36% solids, waterborne-epoxy. As a moisture vapor treatment, Sikafloor FTP will reduce water vapor levels from as high as 8 lbs. per 1.000 sq.ft. to below the acceptable level of 3 lbs. per 1.000 sq.ft in a single coat. This application requires a shotblasted surface. |
|
|
|
Sikafloor PurCem 19N |
|
| |
|
|
Sikafloor PurCem 19N is a trowel grade, heavy duty, solid color, three-component, cementitious urethane mortar designed to provide excellent resistance to thermal stress, abrasion, impact and chemical attack. Sikafloor PurCem 19N has a slightly textured aggregate surface providing increased slip resistance. System is typically installed at 1⁄4 to 3⁄8 in (6-9 mm) thickness.
|
|
|
|
Sikafloor PurCem 20N |
|
| |
|
|
Sikafloor PurCem 20N is a resin rich, easy to apply, heavy duty, solid color, three component, cementitious urethane slurry designed to provide excellent resistance to thermal stress, abrasion, impact, and chemical attack. Sikafloor PurCem 20N has a textured aggregate surface providing medium to heavy profile slip resistance. Typically installed at 1⁄4 to 3⁄8 in. (6-9 mm) thickness. |
|
|
|
Sikafloor PurCem 21N |
|
| |
|
|
Sikafloor PurCem 21N is a self-leveling, medium to heavy duty, solid colored, three component, cementitious urethane slurry designed to provide excellent resistance to abrasion, impact, and chemical attack. Sikafloor PurCem 21N has an aesthetic, easy to clean, smooth surface. Systems are typically installed at 3⁄16 to 1⁄4 in. (4.5-6 mm) thickness. |
|
|
|
Sikafloor PurCem 22N |
|
| |
|
|
Sikafloor PurCem 22N is a self-leveling, medium to heavy duty, solid colored, three component, cementitious urethane slurry designed to provide excellent resistance to abrasion, impact, and chemical attack. Sikafloor PurCem 22N is broadcast with quartz aggregate to increase surface texture and slip resistance. The system is typically installed at 3⁄16 to 1⁄4 in. (4.5-6 mm) thickness. |
|
|
|
Sikafloor PurCem 29N |
|
| |
|
|
Sikafloor PurCem 29N is a vertical grade, three component, solid color, cementitious urethane mortar used for detailing work and coving. It has a finely textured smooth aggregate appearance that provides excellent resistance to abrasion, impact, chemical attack and other physical aggression. Typically installed at 1⁄8 to 1⁄4 thickness (3-6 mm). |
|
|
|
Sikafloor PurCem 31N |
|
| |
|
|
Sikafloor PurCem 31N is a three component, solvent-free, high-build, colored, matte finish coating based on the unique Sikafloor PurCem cementitious urethane technology. Typically installed as a top coat for Sikafloor PurCem broadcast textured finishes. It provides excellent chemical resistance properties and very good durability against abrasion and mechanical damage. Installed thickness 10 mils per coat. |
|
|
|
Sikafloor Vapor Block |
|
| |
|
|
Sikafloor Vapor Block is a two-component, waterborne, vapor pressure reduction system. |
|
|
|
Sikafloor 81 EpoCem |
|
| |
|
|
Sikafloor 81 EpoCem is a three-component, solvent-free, odorless, moisture-insensitive, epoxy-modified, cementitious self-leveling mortar. Especially formulated for leveling and structurally reprofiling on damp, “green” or saturated surface dry concrete slabs for thicknesses of 100-160 mil (2.5-4 mm). |
|
|
|
Sikafloor 82 EpoCem |
|
| |
|
|
Sikafloor 82 EpoCem is a three-component, solvent-free, odorless, moisture-insensitive, epoxy modified, cementitious, self-leveling mortar. Specifically formulated for leveling and structurally reprofiling on damp “green” or saturated surface dry concrete slabs for thickness of 160-280 mils (4-7 mm). |
|
|
|
Sikafloor 90P |
|
| |
|
|
Sikafloor 90P is a single component aliphatic, moisture cure polyurethane topcoat. |
|
|
|
Sikafloor 104 |
|
| |
|
|
A high solids, three component epoxy patch kit. Sikafloor 104 consists of a resin and a hardenerand a specially blended bag of aggregate. |
|
|
|
Sikafloor 105 |
|
| |
|
|
A two-component, penetrating high solids, light amber, epoxy-based primer/bond coat. |
|
|
|
Sikafloor 107 |
|
| |
|
|
A two component high solids, low modulus, low viscosity epoxy primer. This epoxy primer isspecially formulated to form a tough flexible film. This resilient primer has stress relieving and moisture tolerant properties. |
|
|
|
Sikafloor 110 |
|
| |
|
|
A three-component, high solids epoxy/modified polyamine concrete floor resurfacer. This productcan be placed using a screed and finished by hand troweling or power troweling. Typical thickness is 1/4” (6 mm). |
|
|
|
Sikafloor 130 |
|
| |
|
|
Sikafloor 130 resurfacer is a monolithic epoxy floor topping primarily designed for power troweling. It is also suitable for patching floor irregularities. The minimum application thickness is 3/16”. Sikafloor 130 is ideal for restoring old or worn concrete or as a protective overlay on new concrete. |
|
|
|
Sikafloor 171 |
|
| |
|
|
Sikafloor 171 is a chemical resistant, five-component, resin rich, monolithic epoxy floor resurfacer primarily designed for power troweling. It is ideal for restoring old or worn concrete or as a protective overlay on new concrete. The extra resin combined with the effects of power troweling produce a very dense, abrasion, and impact-resistant surface resistant to chemical attack producing higher compressive, tensile and flexural strengths. |
|
|
|
Sikafloor 190 |
|
| |
|
|
Sikafloor 190 is Sika’s unique high abrasion and wear resistant resurfacer. The aggregate to liquid ratio of Sikafloor 190 does not exceed 4.5-to-1 compared to 6- or 7-to-1 ratio for similar products. The minimum application thickness is 3/16”. |
|
|
|
Sikafloor 203 |
|
| |
|
|
A two component, high solids, epoxy coating for medium to heavy mill thickness applications. Can be used as clear or with Epoxy Color Additive to achieve a variety of colors. |
|
|
|
Sikafloor 205 |
|
| |
|
|
A two-component, high solids, thixotropic, epoxy based top dressing for use with Sikafloor Epo-Rok Flooring systems. Can be used as clear or with Epoxy Color Additive to achieve a variety of colors.
|
|
|
|
Sikafloor 206 |
|
| |
|
|
Sikafloor 206 is a three-component coating system based on a high solids epoxy resin system. Sikafloor 206 is highly thixotropic, the cured coating will have a high gloss finish with an orange peel texture. A cycloaliphatic amine-blend curing agent provides good adhesion, physical and chemical resistant properties. |
|
|
|
Sikafloor 207 |
|
| |
|
|
A general service, two component, high solids, epoxy system for use as a coating or as a binder for a pigmented slurry/broadcast system. Applied using Sikafloor Epoxy Color Additive. |
|
|
|
Sikafloor 215 |
|
| |
|
|
A two component high solids, low viscosity, clear epoxy coating designed to be applied from 5 to 15 mils. It can be installed as a stand alone coating or used as a binder in a slurry/broadcast system. Sikafloor 215 is available in clear or with Sikafloor Epoxy Color Additive to achieve a variety of colors. Sikafloor 215 is water clear and has excellent aesthetic properties.
|
|
|
|
Sikafloor 215 Satin |
|
| |
|
|
Sikafloor 215 Satin flooring is a two-component, high solids, tough and chemical resistant epoxycoating. It is designed for satin topcoat applications on concrete floors subject to abrasion and/or chemical spills. Sikafloor 215 Satin can be utilized in a wide variety of environments where low odor is required.
|
|
|
|
Sikafloor 225 |
|
| |
|
|
A two component high solids, low viscosity, clear epoxy coating designed to be applied from 5 to 15 mils. It can be installed as a stand alone coating or used as a binder in a slurry/broadcast system. Sikafloor 215 is available in clear or with Sikafloor Epoxy Color Additive to achieve a variety of colors. Sikafloor 215 is water clear and has excellent aesthetic properties.
|
|
|
|
Sikafloor 265 |
|
| |
|
|
Sikafloor 265 is a two component, high solids and flexible epoxy for use as a flexible membrane.Sikafloor 265 is a true elastomer for use as a seamless, waterproofing membrane. This unique, flexible polymer system maximizes flexibility and elongation to provide excellent crack bridging capabilities. Can be used alone as a Clear or with Sikafloor Epoxy Color Additive.
|
|
|
|
Sikafloor 301 |
|
| |
|
|
Sikafloor 301 is a urethane based additive. It is designed only to be used with Sikafloor 13Pronto. When Sikafloor 301 is added to Sikafloor 13 Pronto it will greatly increase the ability of the Sikafloor 13 Pronto to bond to concrete that contains elevated moisture composition or other contaminants that might weaken the ability to bond properly. It is recommended to be used on properly prepared concrete slabs.
|
|
|
|
Sikafloor 306 |
|
| |
|
|
An oil-free, clear moisture cure urethane coating for concrete floors. Can be used as a clear orin combination with Sikafloor Urethane Color Additive. |
|
|
|
Sikafloor 310 |
|
| |
|
|
A unique low VOC two component, high solids, moisture cured urethane with outstandingabrasion and chemical resistance. Can be used as a clear coating (topcoat) or in combination with Sikafloor 310 Color Additive.
|
|
|
|
Sikafloor 313 |
|
| |
|
|
Single component, oil-free, clear moisture cure urethane coating for concrete floors. Can be usedas a clear or in combination with Sikafloor Urethane Color Additive. |
|
|
|
Sikafloor 315 |
|
| |
|
|
Sikafloor 315 is a three and four-component high solids, abrasion resistant, aliphatic polyurethane coating. |
|
|
|
Sikafloor 340 |
|
| |
|
|
Sikafloor 340 is a two-component, reduced VOC chemical resistant aliphatic urethane that has exceptional resistance to most chemicals. It cures through chemical reaction and therefore is not dependent on atmospheric moisture.
|
|
|
|
Sikafloor 422 |
|
| |
|
|
A water-based, high solids, two-component urethane with excellent abrasion and adhesion properties and enhanced chemical resistance.
|
|
|
|
Sikafloor 510 |
|
| |
|
|
Sikafloor 510 is a clear two-component, solvent-free, high solids, low-viscosity, high strength, polyaspartic resin system. It is designed to be installed as a clear topcoat over a quartz or flake broadcast system where a low VOC, quick cure, flexiblle, UV resistance finish coat is necessary. Sikafloor 510 is available in clear or with Sikafloor Urethane Color Additive to achieve a variety of colors.
|
|
|
|
Sikafloor 700 |
|
| |
|
|
A two component, high solids, novolac epoxy with exceptional chemical resistance. Sikafloor 700can be installed as a stand-alone coating. Its versatility allows Sikafloor 700 to be applied as a topcoat for many of the Sika flooring systems or used as a binder in a slurry/broadcast system. Can be applied as a clear topcoat or with Sikafloor Epoxy Color Additive to create a variety of colors.
|
|
|
|
Sikagard 210 |
|
| |
|
|
Sikagard 210 RM System: Fiberglass Reinforcement Mat utilizes special fiberglass cloth and thermosetting resins that are high solids. Sikagard 210 RM System consists of four coats of Sikagard 210 Resin and Sikafloor 215 Hardener. Fiberglass reinforcing cloth is incorporated into the second coat. Topcoat with a variety of available products depending on end use.** Typical 210 RM application thickness: 21–35 mils DFT.
|
|
|
|
Sikagard 215 |
|
| |
|
|
Sikagard 215 RF System: Fiber Reinforcement Filled Coating includes temperature resistant reinforcement fibers enabling quick, easy application using a roller. Sikagard 215 RF System consists of two coats of Sikagard 215 Resin and Sikafloor 215 Hardener. Should be topcoated with a variety of available Sika topcoats. Typical Sikagard 215 RF application thickness: 20 mils DFT.
|
|
|
|
SikaQuick 1000 |
|
| |
|
|
SikaQuick 1000 is a 1-component, rapid hardening, early strength gaining, cementitious, patching material for concrete. |
|
|
|
SikaQuick 2500 |
|
| |
|
|
SikaQuick 2500 is a 1-component, very rapid hardening, early strength gaining, cementitious, patching material for concrete. |
|
|
|
