 |
Products By Name |
|
Colorplete |
|
| |
|
|
Colorplete is a premixed, mineral, colored floor hardener of premium quality, specifically designed for incorporation into the surface of freshly placed concrete slabs. It provides both a decorative colored effect and increased wear and abrasion resistance. Colorplete consists of selected natural grades of mineral aggregates, pure metallic oxide pigments, pre-blended wetting agents and cement. It is factory controlled blended, premixed and ready-to-use. The incorporation of Colorplete into the working surface of a concrete slab greatly increases the surface strength, wear resistance and abrasion resistance while densifying the surface and making it less permeable. Colorplete surface hardeners provide a durable wearing surface in a variety of pleasing colors without the maintenance costs associated with painted floors. |
|
|
|
Diameg 7 |
|
| |
|
|
Diamag 7 is an economical, mineral shake-applied surface hardener. It contains carefully graded, hard wearing particles, which provide an exceptionally durable surface. Special dispersing and plasticizing agents promote ease of incorporation into the concrete surface. Diamag 7 is premixed and ready-to-use. |
|
|
|
Fastflor CR |
|
| |
|
|
Fastflor CR is a two-component, 100% solids, highly chemical-resistant epoxy floor coating. |
|
|
|
Florseal WB |
|
| |
|
|
Florseal WB is an acrylic emulsion and water-based curing compound which is applied to concrete surfaces following the final finishing operation. Florseal WB adheres to damp concrete and seals in the moisture necessary for curing and hardening the surface. It remains as an effective film to protect the concrete surface from stain and provides a dust-proof finish. Florseal WB is available in a clear formulation only. |
|
|
|
Intraplast N |
|
| |
|
|
Intraplast-N is a balanced blend of expanding, fluidifying, and water-reducing agents for portland-cement grouts. It produces a slow, controlled expansion prior to the grout hardening. |
|
|
|
MRW System |
|
| |
|
|
MRW system is a 100% solids coating for mechanical room, for interior use. It combines elastomeric polyurethane waterproofing membrane and a two-component, flexible, flame-retardant epoxy top coat that can be seeded to provide a non-slip surface. |
|
|
|
Plastiment |
|
| |
|
|
Plastiment is a water-reducing and retarding admixture. Plastiment meets the requirements of ASTM C-494 Types B and D. |
|
|
|
Plastiment NS |
|
| |
|
|
Plastiment NS is a concentrated polymer-based, water reducing admixture. Plastiment NS meets the requirements of ASTM C-494 Type A and AASHTO M-194 Type A. |
|
|
|
Plastocrete 161 |
|
| |
|
|
Plastocrete 161 is a lignin polymer-type water-reducing admixture. Plastocrete 161 meets the requirements of ASTM C-494 Types A, B and D. |
|
|
|
Plastocrete 161FL |
|
| |
|
|
Plastocrete 161FL is a non-chloride, water reducing and accelerating admixture.Plastocrete 161FL meets the requirements of ASTM C-494 Types C and E. |
|
|
|
Plastocrete 161HE |
|
| |
|
|
Plastocrete 161HE is a set accelerating admixture formulated to reduce concrete set times. Plastocrete 161HE contains calcium chloride.Plastocrete 161HE meets the requirements of ASTM C-494, Types C and E. |
|
|
|
Plastocrete 161MR |
|
| |
|
|
Plastocrete 161MR is a polymer-type water-reducing and set retarding admixture. Plastocrete 161MR meets the requirements of ASTM C-494 Types B and D. |
|
|
|
Rugasol-S |
|
| |
|
|
Rugasol-S is a spray-applied, water soluble liquid, formulated to retard the set of surface mortars in concrete to enable the aggregate to be exposed. Rugasol-S is green in color to allow easy identification of areas where it has been applied to ensure a uniform coating is obtained. |
|
|
|
Sigunit L53 AF |
|
| |
|
|
Sigunit L53 AF is a liquid high performance, alkali-free liquid accelerator for shotcrete applications. |
|
|
|
Sigunit L66 |
|
| |
|
|
Sigunit L-66 is a non-chloride set accelerating admixture for shotcrete applications.Sigunit L-66 is non-toxic and non-corrosive. Sigunit L-66 can be used with either the wet or dry process shotcrete.
|
|
|
|
Sigunit L72 AF |
|
| |
|
|
Sigunit L72 AF is a high performance, alkali-free liquid set accelerator forshotcrete applications. |
|
|
|
Sika AcouBond -System |
|
| |
|
|
The Sika AcouBond -System consists of SikaLayer-03 a 3mm (1/8”) a proprietary specially slotted foam mat and the SikaBond®-T53 a unique permanently elastic, sound dampening adhesive that forms a tenacious bond to wood flooring, plywood subfloors, concrete and other common subfloor materials. |
|
|
|
Sika AEA-14 |
|
| |
|
|
Sika AEA-14 admixture is an aqueous solution of organic materials. Sika AEA-14 meets the requirements of ASTM C-260 for air entraining admixtures. |
|
|
|
Sika AEA-15 |
|
| |
|
|
Sika AEA-15 admixture is a liquid solution of concentrated organic materials. Sika AEA-15 meets the requirements of ASTM C-260 for air entraining admixtures.for air entraining admixtures. |
|
|
|
Sika AER |
|
| |
|
|
Sika AER admixture is a concentrated liquid solution of neutralized vinsol resin. Sika AER meets the requirements of ASTM C-260 for Air Entraining Admixtures. |
|
|
|
Sika AIR |
|
| |
|
|
Sika AIR admixture is an aqueous solution of organic materials. Sika Air meets the requirements of ASTM C-260 for air entraining admixtures and AASHTO M-154. |
|
|
|
Sika Armatec 110 EpoCem |
|
| |
|
|
Sika Armatec 110 EpoCem is a 3-component, solvent-free, moisture-tolerant, epoxy-modified, cementitious product specifically formulated as a bonding agent and an anti-corrosion coating. |
|
|
|
Sika Boom |
|
| |
|
|
Sika Boom is a pre-pressurized, portable, one-component, polyurethane foam system applied in a bead form. Sika Boom expands and cures slowly to a semi-rigid, closed cell foam upon reaction with moisture, such as ambient humidity. It is designed for easy dispensing through a straw adapter that is included with each can. |
|
|
|
Sika CarboDur |
|
| |
|
|
Sika CarboDur is a pultruded carbon fiber reinforced polymer (CFRP) laminate designed for strengthening concrete, timber and masonry structures. Sika CarboDur is bonded onto the structure as external reinforcement using Sikadur 30 epoxy resin as the adhesive. |
|
|
|
Sika CarboDur Rods |
|
| |
|
|
Sika CarboDur Rods are pultruded carbon fiber reinforced polymer (CFRP) rods designed for strengthening concrete, timber and masonry structures. The rods are primarily installed using the Near Surface Mounted (NSM) technique by inserting into grooves cut into the substrate and bonded with an epoxy resin. The rods can also be used for anchoring SikaWrap fabrics for positive attachment to concrete or masonry. |
|
|
|
Sika CNI |
|
| |
|
|
Sika CNI is a calcium nitrite-based admixture designed to inhibit the corrosion of steel in reinforced concrete. Sika CNI contains a minimum of 30% calcium nitrite by mass and is formulated to meet ASTM C-494 requirements for Type C, accelerating admixture. |
|
|
|
Sika Control 40 |
|
| |
|
|
Sika Control 40 is a shrinkage reducing admixture used to produce high performance concrete with greatly reduced drying shrinkage. |
|
|
|
Sika Control ASR |
|
| |
|
|
Sika Control ASR is a lithium nitrate based admixture used to control alkali-silicareaction (ASR) in high-alkali concrete, produced when using reactive aggregates.
|
|
|
|
Sika Covercrete Primer 10 |
|
| |
|
|
Sikafloor Covercrete Primer 10 is a 100% solids, two components, moisture tolerant, structural epoxy adhesive used as a wet primer for Sikafloor Covercrete flooring systems. |
|
|
|
Sika Ebonex |
|
| |
|
|
Ebonex is a discrete impressed current cathodic protection (ICCP) anode that utilizes an innovative ceramic/titanium composite with an integral gas venting system. The anode system requires Ebofix grout which has a high density and is acid absorbent for long term stability. |
|
|
|
Sika Equipment Cleaner 650 |
|
| |
|
|
Sika Equipment Cleaner 650 is a solvent-based, low viscosity product for use in the cleaning of tools and equipment. This product is recommended for the cleaning of wet, uncured, sealants and epoxies |
